Is my pump locking the motot up?

ALL-BRITE

New Member
Hey Wiz kid question. sometimes when I try to pull over my 13hp honda at startup with the water on. It feels like it locks up . You cannot even pull it all the way over then if you do it floods the engine so much that gas comes out of the exhaust. What I do is shutoff the gas valve take water pressure off and crank it over till it starts. Which it always does.
Then I quickly turn the water back on and everthing is ok. Whats happening and why? Thanks Tim

------------------
Tim Highfield
ALL-BRITE POWERWASHING
 
H

Hotwaterwizard

Guest
Sounds like one of these three;
1) you are not holding the trigger gun open while trying to start the engine.
2) Oil in the crank case. Pull out the plug pour gas in the hole pull the rope as you stand way back and get the oil out.
3) Your valves in the engine need adjustment.


------------------
Hotwaterwizard@aol.com If You have a problem with your machine, just ask me for help. Check out the Machine Problem Board
 

Our Sponsors

Top