Descaling and desooting

MobileClean

New Member
How often should I do this and how is it done? I think I have figured out the desooting part but the descaling sounds like a more perpexing problem.
Thanks,
Clent

------------------
 
H

Hotwaterwizard

Guest
You have to use Sulferic or Muradic Acid. Very nasty stuff. You can not run it thru your pump it will tear your pump up. I use a Diaphram pump. You disconnect the coils from the pump and hook up the Diaphram pump then circulate the acid untill the violent reaction stops.

------------------
Hotwaterwizard@aol.com If You have a problem with your machine, just ask I'll help if I can.
 
H

Hotwaterwizard

Guest
Only descale when you need to! The acid eats the metal too if you descale alot you will need a good supply of heating coils at $800 each. How do you know when? Your tip will clog up every 5 min and your flow will be low and when you let off the trigger it takes a long time for the unloader to release.

------------------
Hotwaterwizard@aol.com If You have a problem with your machine, just ask I'll help if I can.
 

MobileClean

New Member
Thanks Wiz,sounds like mine is fine
smile_spin.gif
.
Clent

------------------
 

Our Sponsors

Top