Recent content by B.J. ELLIS

Hey can anyone tell me the best way to go about collecting some money from a power wash company I did some work for. He subcontracted me to help powerwash a 60,000 sq ft parking lot. After completing I had him sign a invoice/bill for the amount with a term of payment of 30 days, and he said as...

I have several conveinence store lots to give estimates on. They would like me to clean from the store front to to ther side of the gas pump canopy. How much should I charge to clean around pumps, and parking stalls (heavy oil and grease)using flat surface cleaner, hot water, and degreaser. and...

Rig Pic Here is a pic of my rig, as soon as the work slows down a bit I'm going to move the 25 gallon chemical tank to the upper deck/ladder rack. I just started biz January 02, with great boards like these, biz has been great!! Thank The Lord!!!

EXTENDA - WAND Well Guys I retract my statement, Steve @ Extenda-wand called me back today, very professsional, and sounds like there just getting started, and I completely understand that, as I'm in that mode myself. I ordered a catalog and if everything goes well will be ordering one shortly...

EXTENDA WAND Mark I agree, I called them over two weeks ago, and have left several messages with no return call I believe I will go with the coress wand, it is a little more, but you do know that the company really does exist for warranty or anything else.

DFW Area?????? Thanks for the help Dan, I have a subscription to the mag., and I never thought of it. I will give them a call!!!! Thanks Again

Can anyone tell me the enviromental regs. for pressure washing in this area? or where to find out? What about licensing etc.? Thanks For The Help!!!!!

Burner Problems Fixed Thanks for all the help guys!!! Mark after you sent me the wiring diagram the burner was up and going in about five minutes (Fuel shut off valve wires were crossed.) By the way for anyone interested, it was a bad fuel pump, Thanks again Mark for all your help!!!

Burner Problems Mark, Thanks again for the help, and I will take you up on that offer. Well it sure hasn't been Ed with the million dollars. Ha Ha.

PAINT PREP I believe it is alluminum, loud does not even come close, I will try the tip and degreaser tomorrow. But, I don't have heat right now I'm waiting on my replacement fuel pump, should be here Friday. Thanks for the help.

I Started a mobile home wash today, the customer wants me to remove the oxidized white paint from the galvanized tin to prepare the home for painting. Yesterday I wet one wall down and then x-jet-ed my house soap on let dwell for about 5 min. and then scrubbed with a soft brush, then rinsed...

Thanks Mark, Thanks for your help. I will call you today, I need to order a down stream injector, and a couple of other things, I need a catalog.

Bigboy, I don't know quiet yet, but I ordered a new fuel pump from Mark. I will let you know if this works.

Thanks Thanks form the help guys, First sign of daylight I will try your suggestions. If it will help I did remove the shut off valve completely from the fuel pump housing and started the machine and burner, but again no fuel out even the open port. But again I will try your suggestions in...

I have a Mi-T-M machine with a 12 volt Wayne burner, Suntec fuel pump, with a exterior suntec shut off valve.(see pic) My problem is the burner is not getting any fuel (diesel) I replaced the inline fuel filter, removed discharge line going back to fuel tank started machine (burner on) and got...