Recent content by Stateline P/W

Extreme, I sold the unit thursday. Thanks to all that called and were interested enough to check it out. I wish everyone the best of luck Steve

Hey Mark, trailer is included. It's a 5x7 trailer but the only drawback is the trailer is not heavy duty enough to put a tank on. It is centered up on the trailer so it pulls well. Steve--(336)351-3738

Alkota 4533 Hot/Cold Pressure Washer 3000psi. 4gal/min 250gallon poly tank with metal cage 200gallon poly tank 50’ high pressure hose 100’ high pressure hose 3’ adjustable wand 4’ strait wand all with disconnects 6’ strait wand 18’ extension wand...

Reduced to $3200. Email me if interested......will deliever half way to anyone living in NC ...STATELINEPRESSUREWASHING@HOTMAIL.COM

Hey everyone, due to family problems, I am trying to sell my pressure washing equipment. I have a Alkota 4305-2t with a Honda 13hp and electric start. If the image comes up it should be a pic of it. Except mine doesn't have the ss coil wrap or the reel mounted on it. It's mounted on a 5X7...

Does the house have city water or well water? The city water will more than likely have more flow than a well. But will also have a regulator on it to restrict the amount of water flow.

you would be lucky to get $5 for just rinsing. Depending on where you are at, $1.50 to $2

Hey Lance, you might could try a hose clamp to keep the aluminum togather and from splitting any farther.

Hey TRod02, I just sent you an email

<marquee> Thanks for your help Mark.......... </marquee>

Hey Mark, I took the cover off the pressure switch and it was working the little mechenism. So I took off the fuel line to the burner and checked it. It would not squirt fuel every time I opened the trigger. Maybe every 8 or 9 tries......

The motor is running at full throttle. I've never noticed a deisel smell out of the burner, but I have a house to do this afternoon and I will check it then. As far as pressure, I don't have a gauge, but there is not a noticeable loss. I will also take the switch apart and see if it is...

Ok, sorry it took me so log to get back. My week has went all to pieces. I got a filter and that didn't help. What would be the next step to figureing it out. At least that I could do and not take it in to a shop. It is an Alkota 4305 2T 4gallon per minute, 3000psi hot water. It is 12 volt, with...

Thanks for the reply Mark. The nozzels are the ones that came in it. I'll check the fuel filter tommorow afternoon. If that's not it I will get all the info and give you a call.

Went to do a job yesterday and when I turned the burner on and pulled the trigger it wouldn't fire. When I stopped to change tips and pulled it again it fired. It wouldn't fire everytime, maybe every 5 or 6 pulls of the trigger. It's on an alkota unit, and it's a suntek burner. Anyone have any...