Search results

I have copied my favorites so that I can use on a different PC. Am using AOL, so go to help section and it shows how to copy to diskette. Not sure it is same method as IE approach above. Check out your ISP.

Ps. Can I use R109?

Do you do anything different to get road salt off of vehicles. I have several trucks and other equipment to clean tomorrow - owned by lawn care guy that has been clearing parking lots.

You might want to talk to your authority about pulling water from a hydrant. Here you need to use a meter - rent meter, then pay for water. The meter rental is not cheap, as there is a one year period.

Hampton, interested in the "inside work" you are doing. What type of restroom work are you doing? What is involved in tile work in the dining areas?

Scott, thanks for the idea on the angle grinder. Purchased one today.

Don't know about WC machines, but I buy a lot of supplies from them. Good people.

I prefer brass couplers over stainless in the tough construction environment we operate. Use SS plugs in some places, brass in others. Don't have a cost effective source of Adams, so don't use. For us, Breco better than Hanson, Hanson much better than Chinese stuff floating around. Have...

Bob, I'd be sure that there are no air leaks.

Michael, thanks for all your support on these boards. Your professionalism is unsurpassed.

I have determined that the variability of the injectors and of the adjustment screws is so high, that I only use injectors without the adjustment screw. I adjust the mix in the chem container (usually only use one of 3 ratios) to achieve the correct on the surface chem concentration.

Can you recommend soda blasting equipment / manufacturer?

If this is really dryvit, not stucco, go to the dryvit site. It will tell you to use sureclean 600, which is muratic acid based.

If it works the price of the pig may be a good deal. I'd want to be sure that the pass through rate is high enough to allow me to keep running without stopping to allow draining.

I forgot to ask. What do you charge per sq ft for applying the epoxy? What % of price is the epoxy itself? Also, tell me more about staining concrete. Sounds interesting.

To summarize the above, esp. Big Boy's replies, stick with the acid. I'd spend my time optimizing application and handling the acid as opposed to trying to brute force prepare using a PWer.

Good thread. I have several 2021 machines and a couple of direct drive AR pumps. Have routinely replaced valves on the 2021 pumps, which I found rather simple. Any recommendations on other "easy to do myself" items? I would like to get spares on hand for those situations. I saw packing...

Mobileclean, go to the flojet web site and look at specs. I went through this same deal early last year. If memory serves me right, the highest flow/psi I could get with : 1. no screw in the flow path, and 2. with viton, was 150 psi and 1.4 gpm, which was good enough for me. If you do your...

Was asked to clean a vinyl house. Guess it is 15 years old and never been cleaned. Went to look at over the weekend. Noticed that there appeared to be a lot of oxidation on it - when I rubbed my wetted finger across the siding, a bunch of white appeared on my hand. When I rubbed hard, I left...

I'd try normal house wash chem. If stains are rust related, clean those two areas with oxalic or similar mtl.