All American PH8030HGOD


Moderator / Sponsor
Here are some pictures of a machine we delivered yesterday
to one of our long time customers.

8 GPM @ 3000 PSI, 325 gallon Norwesco water tank, Steel Eagle hose reel,
(customer only wanted one reel as they fill water tank from hydrants)
trailer from Carson Trailers.

Note the 1.5" inlet hose, this is important to extend pump life, and provide
an adequate water supply to machine, the inlet fitting 3/4" MPT x 1.5" barb
is from AR North America.

In case you are wondering, you need to have approximately 1/2 tank of water
before starting machine, after primed it will draw water to bottom of tank.:)


  • PH8030HGOD-03082012.jpg
    26.4 KB · Views: 18
  • 1.5-InchInlet.jpg
    34.7 KB · Views: 19
  • PH8030HGOD_030812.jpg
    32.1 KB · Views: 18


Moderator / Sponsor
We have a Hydro Tek SC30009 skid we are reconditioning
8.5 GPM @ 3000 PSI[getout]

Putting either a new Honda or Kohler on her,
depending what buyer wants.

Any takers?? Probably going to be $3500 - $4000
depending on what we invest in it.


New Member
I am noticing that the gpm is what you want higher wrather than the psi. I used to always think it was the other way around.

Our Sponsors