Antifreezing machines

[rvagnoni]

I was curious about the best way to antifreeze my two portable cold water machines. Since neither of them has a float tank like my hot water unit.

We have been just pouring antifreeze into the inlet side of the pump and running through. Is their a better method?



------------------
Rick - Deck Care Plus

 

[Larry L.]

Rick

Put your inlet hose in a 5 gal. bucket(mixed antifreeze) and let it suck it threw your psi hose and unloader.When the antifreeze makes it to the end of your psi hose put that end of hose in the 5 gal. bucket also and let it run while working your unloader.You can leave both hoses in the bucket,that way you can start and let it run every week or so if you want..........C-ya

Wiz:,,,Do you work on V8's?
I'm having trouble getting rubber when it hits OD,done bored carb,do I need more spark or more fuel?Still scratching back of my pants,Its sort of a souped up 430.


------------------
When In Doubt,,,,Think It Out.

 

[Hotwaterwizard]

He hit the nail right on the head. Use pure Antifreeze in a 5 gal pail and draw it thru your pump without a tip on the gun. Run it in a circle back into the pail. Just stick the output back in the pail so you don't get it all over the ground. Dogs and Cats love to lick that stuff off of the ground and it will kill them.

------------------
Hotwaterwizard@aol.com If You have a problem with your machine, just ask me for help. Check out the Machine Problem Board