Bullet proof hand piece

B

bkel

New Member
Been a long time since I posted on here, probably too long, but pretty much been cleaning 6 days a week so I can't complain.
I am having nothing but dramas lately (last 6-12 months) with the outlet nozzle on my gun (i use Vega 5000psi handguns) splitting after a couple of weeks. I have tried to replace the whole nozzle with stainless pipe, only to have the main body split. It's splitting due to the soft brass material. I have been using Vega guns for over 13 years and have only found this to be a problem in the last 12 months, so I don't know if they have gone to a cheaper grade metal or what?
Can anyone recomend a hand piece which is built to last and isn't made of brass, but stainless? I admit I am pretty hard on my guns, but they should, and usually do, give better service than 2 weeks.
Mark are you still able to ship to Australia?
 
Ron Musgraves

Ron Musgraves

Administrator
Staff member
bkel said:
Been a long time since I posted on here, probably too long, but pretty much been cleaning 6 days a week so I can't complain.
I am having nothing but dramas lately (last 6-12 months) with the outlet nozzle on my gun (i use Vega 5000psi handguns) splitting after a couple of weeks. I have tried to replace the whole nozzle with stainless pipe, only to have the main body split. It's splitting due to the soft brass material. I have been using Vega guns for over 13 years and have only found this to be a problem in the last 12 months, so I don't know if they have gone to a cheaper grade metal or what?
Can anyone recomend a hand piece which is built to last and isn't made of brass, but stainless? I admit I am pretty hard on my guns, but they should, and usually do, give better service than 2 weeks.
Mark are you still able to ship to Australia?
Click to expand...

Doug Rucker handles info for residential guys, welcome back
 
B

bkel

New Member
Cheers Ron, but we do commercial work, hence we're chasing some industrial strength hand guns, since our usual manufacturer has taken the cheap options, costing us time and money.
 
Mark

Mark

Moderator / Sponsor
The ST2700SS is a Good Option
ST2700SSSprayGun.jpg

The all stainless steel internal components of the ST-2700 SS Spray Gun create a durable long lasting trigger gun, especially suitable when using corrosive chemical. A comfort technology designed trigger system actually helps the operator keep the trigger open. Fatigue is reduced, allowing longer work periods. The Suttner exclusive relax-action trigger and comfort grip reduces trigger force up to 20% and holding force up to 60%.
The ST-2700 SS also features a proper spray angle for optimal positioning of pressure points; a unitized valve for easy repair; and a forged brass housing for maximum strength.

Specifications:

Maximum Fluid Temperature: 300 Degrees
Maximum Discharge Pressure: 5000 PSI
Flow Rate: 12 GPM
Inlet: 3/8" FNPT
Outlet: 1/4" FNPT

$250 minimum order for shipments to Australia..
 
You must log in or register to reply here.

Our Sponsors

Top