CrownPressure
New Member
Mark, I hate to say it but my 12V burner has cropped up with another problem. The guys were hugely helpful last time I had a problem so here goes with what I'm dealing with this time.
Beckett 12V burner (w/Hydro-Tek 3505) with new switch and thermostat control on front panel, new automotive size battery, brand new igniter, brand new diesel fuel pump, brand new solenoid on side of burner and my fan motor runs fine when hooked up directly to 12V. However, when everything's together, the fan's not running and of course, not turning the fuel pump. Same wiring as before when everything was fine. Somewhere, I'm losing power to the fan? My other unit's a damn-near identical, Mi-T-M 3505 w/110V burner and I never seem to have trouble with it? I might try calling Hydro-Tek and ask them how I can effectively test with a tester just where I'm losing power to my fan motor.
Beckett 12V burner (w/Hydro-Tek 3505) with new switch and thermostat control on front panel, new automotive size battery, brand new igniter, brand new diesel fuel pump, brand new solenoid on side of burner and my fan motor runs fine when hooked up directly to 12V. However, when everything's together, the fan's not running and of course, not turning the fuel pump. Same wiring as before when everything was fine. Somewhere, I'm losing power to the fan? My other unit's a damn-near identical, Mi-T-M 3505 w/110V burner and I never seem to have trouble with it? I might try calling Hydro-Tek and ask them how I can effectively test with a tester just where I'm losing power to my fan motor.