Landa hot water 8 gpm

Cat Powerwash

New Member
hello all!

I am building a new hot water trailer unit and always xjetted my chemicals on houses with a 5 gpm machine. Now I will have a 8 gpm machine and I would think that I would have to double or triple the mixes to get it strong enough to kill the mold. I dont want to do this. Can I add a pump to my down streamer to get the chems on stronger?


Dino
 
Last edited:

1105

New Member
You want need to do that, one machine, one injector and line, will be all you need. Besides, stop carrying that bucket and using that x-jet. There are easier ways that will speed up your time and you can leave your soap on the trailer. Let me know if I can help.
 

tbarace

New Member
What would be the easier way.aAny help would be appreciated.What a big help it would be to leave the soap on the trailer and not walking back and fourth to turn soap on and off all the time.






ERIC
PRESSURE CLEAN POWER WASHING
ep.hilbert77@yahoo.com
 

Cat Powerwash

New Member
By using the downstreamer, how do you shoot the chemicals on high houses with the black tip? The xjet can shoot up about 30 feet . would I stll be able to use the xjet with the down streamer?
 

1105

New Member
Email me at carolinapressurewashing@yahoo.com

I am guessing you are using a hose reel, Right. I have ran like this for eight years and never carried a bucket. Place your injector down stream between your jumper hose and Hose reel (w/ quick connects). The straight tip I use cost approx eight dollars, its like a #30 or close...email me for info on tip. Place injector hose in whatever and flow away. Also, if you use a dual wand you will be faster. This works great. I run two Landa 8 gpm machines with 250 ft of hose on each, no problems so far. You should be able to clean just as high as the x-jet (or atleast 3 stories) without the heavy bucket.
 

Our Sponsors

Top