Nearly New PW Trailer System

[HydraClean]

Though this is my first post, I have been reading this forum for months. Thank you for all of the valuable information! Unfortunately, my time in the pressure washing industry is coming to an end. My loss is your gain! I am offering a top-of-the-line trailer mounted hot/cold pressure washer system with a recover/recycle system. It is in almost new condition with just 11 hours of use. I invested over $22,000 in the set up (I can document the amount with receipts). I am willing to sell at a loss for $16,000 OBO. I will deliver at no charge within 500 miles of Houston, further distances are negotiable. As a bonus, if you are located in Houston, the 2008 Department of Health Waste Hauler Permit is already in place (less than 10% of Houston pressure washer contractors are legally operating with this permit).

The system includes the following:

Hotsy 1270SS Hot/Cold Water Pressure Washer
• 4000 psi, 4.5 GPM
• Fuel Oil Fired 385,000 BTU Hot Water Heater
• 20 HP Honda Engine
HydroTek AZV55 HydroLoop Flatwork Recovery and Filtration System
• 4.5 GPM Capacity
• Three Filter System to 5 ppm
• Recycles Filtered Water to PW tank
NorthStar 5500kw Gasoline Generator
• Honda 9 HP Engine
JP Trailers 12’ 7,000lb Dual Axle Trailer
• Electric Brakes
• Treated Wood Floor
• Diamond Plate Fenders
• Side Mounted Vaccuum Hook Up and Drain
• Water Bypass Loop
250 Gallon Water Tank
HydroTek HydroTwister Contractor Surface Cleaner
• Gum Spotter
• Sweeper
Pig Industries Spill Blocker Drain Mat 42x42
Pig Industries Spill Blacker Vacuum Dike
2 Rapid Reel 5500 Series Hose Reels
Delta Tool Box
100’ Black 5000psi High Pressure Hose
250’ Grey non-Marking 4500psi High Pressure Hose
2 Hotsy High Pressure Wand Assemblies, with 5’ Whips
4 Five Gallon Fuel Tanks—2 diesel, 2 gasoline
Downstream Assembly with Adams Injector
4 Way Nozzle Holder
Various Nozzles, Gun Assemblies, Couplers, and Valves

Please call me at 713-614-8855 with any questions. Additional pictures available via email.

Thank you in advance for viewing my post!

Regards,
Kyle Wilson

 

[AmeriProClean]

Is this rig still for sale?

 

[Bryan C]

$22K for 16 hours use? Your price is a little high, even for the great condition. Consider $12K?

 

[Bryan C]

Still for sale? Will you part it?

 

[ldniii]

Is this rig still for sale?

 

[Mark]

Bryan / Loren,

You might want to give him (Kyle) a phone call:
Please call me at 713-614-8855 with any questions.
Additional pictures available via email.

Thank you in advance for viewing my post!

Regards,
Kyle Wilson

If it is sold already ask him to post that it is sold here.

Thanks
[hand]