nozzle size

Cat Powerwash

New Member
What is the best nozzle size and spray pattern for a 28" surface cleaner with two nozzles coming out of the bar. I have a 3000 psi 4.8 gpm landa skid unit.
 
Last edited:

DAFF

New Member
Look it up on a flow chart. Do a search on this site, you will find it. Keep in mind tip choice is quite simple once you see and use the chart.

DAFF
 

Cat Powerwash

New Member
for some reason the search fuction isnt working. i have a nozzle chart but need to know what is usually used for this size cleaner. with two bars, the pressure is cut in half. Do I use two 2506? or should I go lower in the orafice size? Right now I have two 1503 installed.
 

Mark

Moderator / Sponsor
To lower the psi you need larger nozzles,
if you wanted approximately 1440 PSI you
would go to -two- # **04 nozzles.

(**Would be your spray pattern 15 or 25 degree typically.)

For 4.8 GPM @ 3000 PSI you would use one #**055 nozzle.

Hope this helps.
 

Our Sponsors

Top