Ron Strickland/Xtrerior S
New Member
Tim,
Just saw your post tonite. There are 3 probables to this problem. If you are on the top of a ladder, it won't draw at that heigth. You have to be lower to get a vaccuum. Secondly, You might have an air leak around the clamps at the shut off valve or a pinhole in the hose. The third problem may be a stopped up orifice. Sight through the back of the nozzle. You should see daylight. If you don't, you have a stopped up orifice.
Take the plug off the X-Jet and clean the orifice hole. If the problem persists, call me at 1-800-983-7467 and we will get to the problem.
Thanks,
Ron
Xterior
------------------
[This message has been edited by Ron Strickland/Xtrerior S (edited August 29, 2000).]
Just saw your post tonite. There are 3 probables to this problem. If you are on the top of a ladder, it won't draw at that heigth. You have to be lower to get a vaccuum. Secondly, You might have an air leak around the clamps at the shut off valve or a pinhole in the hose. The third problem may be a stopped up orifice. Sight through the back of the nozzle. You should see daylight. If you don't, you have a stopped up orifice.
Take the plug off the X-Jet and clean the orifice hole. If the problem persists, call me at 1-800-983-7467 and we will get to the problem.
Thanks,
Ron
Xterior
------------------
[This message has been edited by Ron Strickland/Xtrerior S (edited August 29, 2000).]