Clean County
New Member
Hey Wiz,
I have a Landa pghw 3000psi 4.8gal/min hot water pw and its only a year old. Yesterday I was using the hot water and I decided to check the psi and temp. The psi was fine but I had a problem with the temp. When I set the thermostat at 150 degrees the pw would go right to it. The problem is when I set the thermostat higher the temp. would not go over 150 degrees. What do you suppose the problem could be? I thought about possibly descaling the coils but since the machine is relatively new it shouldn't have to be done at this time. What do you think?
Thanks
-John-
------------------
I have a Landa pghw 3000psi 4.8gal/min hot water pw and its only a year old. Yesterday I was using the hot water and I decided to check the psi and temp. The psi was fine but I had a problem with the temp. When I set the thermostat at 150 degrees the pw would go right to it. The problem is when I set the thermostat higher the temp. would not go over 150 degrees. What do you suppose the problem could be? I thought about possibly descaling the coils but since the machine is relatively new it shouldn't have to be done at this time. What do you think?
Thanks
-John-
------------------