CrownPressure
New Member
'Gentlemen, I've got a question on a Beckett 12V burner fuel pump on a typical Hydro-Tek 3505 pressure washer. It's the standard SUNTEC diesel fuel pump used on most Beckett burners. On my original fuel pump, I bled the pump with the bleeder valve just like you would bleed a brake caliper except I bled it quite a bit longer; got all the air out. Then, I opened up the outlet fitting that goes to the burner, turned on the switch to the motor and and no oil, no pressure out that side? 'Ordered a new pump (since my original one is 12 years old) bled it for a good 1 1/2 minutes and still, no oil from the outlet side? Any suggestions? Thank you.