Recent content by sluggo

Hey Jeremy, I was wondering which chem company you deal with. I also was interested in your dilution How much are you able to produce with a 5 gallon container of 50% sodium hydroxide. What percent is the dillution you use. BY THE WAY I dont like the commute to Seattle in the morning. So I dont...

I know this has been covered before. But mixed reports have me confused.The way i understand it hot water opens up the pours of wood. This is good because the wood can absorb more stain. Why do most people use cold? I have asked a few people about this and they say damage occurs to the wood...

Most of the people i have talked with here are totally sold on ready seal.It is a very good product. The Biowash oil I have never heard about myself. I visit all the boards that deal with wood( i think) and have not heard any talk about bio's stain i would personally( if i were you ) try to talk...

Mike covered most of it( he knows his stuff)It is important to remove all your previous stain or else you new application will be blotchy or uneven. Sodium hydroxide is commonly used for removing stains. It is applied in a very diluted solution. Usually 2 to 6% it sits on the wood until the...

Any ideas where i could come up with a coupon template. Thanks in advance

Great tip Thanks!!!

Shurflo 1.4 GPM 12 Volt Diaphragm Pump or Shurflo 3.0 GPM 12 Volt Diaphragm Pump Which would be the best of these two for the application I described?

Sodium hydroxide is very dangerous in its pure 100%form. i was thinking of more like the diluted form of about 2 to 4%. This stuff is used in many around the house products. The stongest i can figure would be oven cleaner.The weakest would be somewhere in the fridge in your food.This is...

Doany of you mix this I would be interested in hearing about your experience with it.

I was thinking of a surflo mounted to my trailer in a water proof case. I'd need it to run off a battery, also in the trailer. The chem buckets would stay in the trailer and id run about 200 ft of hose from the pump.Then id use a gun from one of those pump up types. Any suggestions on which...

Say Wiz was wondering if you could send me the parts list for making a chemical applicator. With a parts list im sure i could put one together. brownar20@hotmail.com

Good idea Ramon Thank you very much!

Ideally I'd like a 5gpm 3000psi machine BUT most water supplies in my area run at best in the 60psi range. I hate the idea of a hauling a water tank with my half ton truck.Until I can upgrade my truck i was going with a 3gpm machine. I dont have a formula other then filling a 1 gallon jug and...

Would you consider selling just the machine? Is the machine model B3535H? I already have a trailer, and the gadgets I need. Moneys not easy right now, so buying extras is not feasable.Let me know and thank you.

Ok i believe i need to fill in a few details. The machine would almost exclusively be used for wood projects. I will add a hotbox later.I already have a direct drive machine,hose reel, accessories,trailer guns etc.looking for a belt drive 13hp honda, general pump,giant uploader, water...