Does anyone have any idea of what I can use as a degreaser that is safe to use near water ways and does anyone have an idea what to bid on a job like this. The client wants me to clean a four 10 x 10 engine rooms to get it prep for blast and paint. The engine room is filled with oil , grease and grime . The room is very cramped and has very little room to move around . I do have two fairly large doors That give access to the engine room to gain access to area needing to be cleaned. i'm guessing it going to take 3 hours tops to clean each crane . I thinking about not bidding on this job cause it's near the water and I dont want the run off to get in to the water system near by. I dont have a water recovery system I can use . Does anyone have any ideas.
-
Check out this this free event.
cleaning a engine room for a crane
- Thread starter Hot Shot
- Start date
Dave Olson
New Member
You might consider soda blasting. It would be very slow tho! The oil and grease would also be a big problem if you are working on the water.
Have you asked the customer if they can handle the containment of the oil, grease, detergent, and water?
Dave Olson
Have you asked the customer if they can handle the containment of the oil, grease, detergent, and water?
Dave Olson