-
Check out this this free event.
general pumps
- Thread starter Austin
- Start date
Mark
Moderator / Sponsor
Austin.
The link was edited I believe automatically when Dan set up this board there was several url's and names that were automatically edited if posted.
Or it could have been edited by a Moderator?
Dan Flynn's intentions here are that only Paid Sponsors would be promoted, and allowed to advertise on his Board.
We sell General Pumps also, and are a paid sponsor of this BBS, however I don't know what are price would be off the top of my head, call me Monday if you like and I will give you the best price I can.
The link was edited I believe automatically when Dan set up this board there was several url's and names that were automatically edited if posted.
Or it could have been edited by a Moderator?
Dan Flynn's intentions here are that only Paid Sponsors would be promoted, and allowed to advertise on his Board.
We sell General Pumps also, and are a paid sponsor of this BBS, however I don't know what are price would be off the top of my head, call me Monday if you like and I will give you the best price I can.
Bob Warfield
New Member
I have a General TS 2021 on my Landa unit. It's rated at 4.5 g.p.m. How are you guys getting so much more flow?
Thanks,
Bob Warfield
Thanks,
Bob Warfield
Chuck Richard
New Member
I use 2 general ts 2021 myself and in two years and 800 hours have never had a single problem, except what i caused myself.They are great and i would never use anything else even if it were FREE.
Mine flows 5.6gpm at 3200psi which is what the general manual rates them at but i think they all very a little. one of my pumps is 200 psi stronger than the other.
About getting one at a great price, check around but the cheapst price may not always end up the best when u throw in shiiping charges.
Mine flows 5.6gpm at 3200psi which is what the general manual rates them at but i think they all very a little. one of my pumps is 200 psi stronger than the other.
About getting one at a great price, check around but the cheapst price may not always end up the best when u throw in shiiping charges.
Have been running a TS2021 at 4000 psi @ 5gpm (18HP). Love the pump. Just received today a new PW from same manufacturer for duplication (spare parts) reasons. However, had configured for 3500 psi @5.6 gpm (pulley change) because I wanted the flow rate. This is the GP stated design. Purchased with a 20HP engine just because I wanted it.
Don't know if it is still on sale, but a vendor I often use was selling the TS 2021 pumps for $265 a while back - may be the same guy that was XXd out. If you want the name, email me.
Don't know if it is still on sale, but a vendor I often use was selling the TS 2021 pumps for $265 a while back - may be the same guy that was XXd out. If you want the name, email me.
Mike Hughes
New Member
the bbs software is programmed to xxxxxx out certain words, set by the administrator as Mark was saying.