Looking for a Hot Water Machine

[Coastal]

What are some machines that you all have been successful with. Please post your pros and cons if you can. Thanks!

 

[gull maint>]

I am in the process of unloading a storage unit and selling all the equipment that I have been storing for years and never use. I'm located in Naples.

I have a used AMC hot water module/hotbox.........old needs a fuel pump flow switch and an on/off switch. Probably $200 -$300 in repairs if you order the parts install what you can and have a shop wire it up I have no use for hot water anymore.If you think you may want this one you're welcome to it for the small price of $100. I was going to see if my local hotsy dealer wanted to buy it.Any way if you want to contact me : cleanitrightnow@aol

 

[Coastal]

Thanks gull_maint but I am looking for a new machine.

I appreciate your response!

 

[Greg/sd]

gull maint i might be interested in the hot box. call me 407-957-6566 tell me about it how many btu's how many gpm's i can run through it. greg

 

[Mark]

Brett,

Here are a few pictures of a rig we finished this wek for
one of our local contractors. It is rated 8 GPM @ 3000 PSI, powered
by a 24 HP Honda, with a belt drive AR pump and a 115 volt generator,
Wayne buner etc. The reels are ReelCraft, and we have added a 525#
gallon tank.

We have also installed a high volume pump powered by a Honda,
this unit can supply water to the machine, run a fire hose for fire fighting.
parking wash downs, building wash downs etc. We may plumb the truck
with side, front, and rear wash down nozzles at a later date.

Scott the owner of this rig plans to add one of our water treatment systems
in the future to this rig. His trailer rig is already set up with one.

 

[Coastal]

I can't imagine what the shipping costs of that beauty would be from CA to FL.

 

[Mark]

Shipping on the skid pressure washer would run about $250

 

[Aplus]

Mark set me up with a similar machine, only a little less power, but it sure kicks butt, and hasn't had a problem yet.