Mosmatic Spinner doesn't

[Douglas Hicks]

Some time ago I bought a Mosmatic Spinner Nozzle. I has been working great, a time saver and the vertical ducts are much cleaner. But the thing seams to have lost power, and does not spin as fast. I did remove the nozzles, they are clean and not obstructed. Water comes out of both nozzles, just no power. Any suggestions?

Douglas Hicks
General Fire Equipment Co of Eastern Oregon, Inc


------------------

 

[Larry L.]

<FONT face="Comic Sans MS"><FONT COLOR="Blue">Some time ago I bought a Mosmatic Spinner Nozzle.

Sounds if your nozzles are worn,replace with the same degree and gpm.</FONT c></FONT f>

------------------
<FONT COLOR="orangeRed"><FONT face="Comic Sans MS">When answering Post If It Sounds As tho I'm Holding A Match To Ya "Fear Not" Its Only Lit On One End.</FONT c></FONT f><FONT face="Comic Sans MS"><FONT COLOR="Fuchsia">I'm No Doctor The Pill I Subscride Is For Me Only.They May Make You Jump Up and Down Or Crawl All Over The Ground.</FONT c></FONT f><FONT face="comic sans MS"><FONT COLOR="blue">Will Try To Help Sail Your Ship Even Tho Rocket Fuel Is The Tip.</FONT c></FONT f>

<FONT COLOR="red"><FONT face="Comic Sans MS">When In Doubt,,,Think It Out</FONT c></FONT f><FONT COLOR="green"><FONT face="Comic Sans MS">.....triplel@bscn.com</FONT c></FONT f>

 

[Hotwaterwizard]

Nozzles or seals inside of the swivel are worn. You can get new seals from mosmatic.

------------------
Hotwaterwizard@aol.com If You have a problem with your machine, just ask I'll help if I can.