Need hot Pressure Washer

Mark

Moderator / Sponsor
Certainly!

Send me your address etc.

In the meantime here is some online info.

http://store.yahoo.com/pressurewasherzone/allamstreami.html

http://store.yahoo.com/pressurewasherzone/5gpm30psitra.html

pressurewasherzone_1658_2847626
 

Dan S

New Member
that last pic. is one fine looking machine Mark......... what knid is it? looks like it would be a pain to service does the cover in frt. of the motor come off easy?.......i like the looks of it.............
 

Dan S

New Member
Mark im looking for either a see thru tank or a cap that has the gauge in it..... probably a see thru .......if i can find a good see thru then i can make it bigger then what i have........ i here some guys pump outa there tanks from there trk. to run the p/wer.....i heard some good and bad doing it this way.................the tanks i have now is stainless and you cant see nothing....<marquee>........sooooooo whatcha think?</marquee>
 

Jon

New Member
Dan,

Forget the caps with gauges, not worth the money, I had them and traded back for regular caps.

Keep a peice of old hose and when you think your low on fuel insert it down and see how much is left in the tank. That and a flashlight to look in should do it.

Mark,

Why is it there is always 2 gallons of fuel left when the tanks run out? Seems All American and other brands put the suction hoses about an inch to inch and half above the bottom of tank?

Only reason I can come up with is to prevent sucking out the sediment that settles on the bottom, but is that not what the filters are suppose to do?
 
G

Glenn

Guest
Not sure how this picture will come out... but here goes.
This is our Tuff Tank Trailer unit. I like the steel coated tank as it lets zero light in to promote algae growth. It also has baffles to control the sloshing of its 500 gallon payload.
 

Attachments

  • tank trailer.jpg
    tank trailer.jpg
    24 KB · Views: 261
G

Glenn

Guest
Our other models if you prefer to use your own trailer...
 

Attachments

  • hot water washers.jpg
    hot water washers.jpg
    15 KB · Views: 198

C&T Pressure

New Member
Nedd hot pressure washer

Hey Glen How much for the skid pressure washer in the 2nd picture? What's the psi? gmp? Do you have one in a 3500psi 4gpm. Please get Back to me

Thanks
I think the trailer runs about 4000.00 correct. i saw it on the web site the other day.
 

mtdave2

New Member
this might be a silly question, but how do you ship something like that?? how long does it take? if i get this bid im working on ill need one of them!
 

Mike Hughes

New Member
mtdave,

To answer you question about shipping, you can either pick them up and drive them home from the manufacturer/dealer...........or you can do like I did and have it shipped........My trailer is a bit bigger then the one pictured above.....and mine was shipped on a flatbed 18-wheeler.
 

nedparks

New Member
Chuck, I have a rig for sale and live in Summit County just over the line from you. Drop me an e-mail and I will send you the specks and we can hook up to you can see it. Oh BTW if you end up duying it I will toss in my customer list and prospects.

nedparks@yahoo.com

Ned
 

Aplus

New Member
Ned,
Can you post a picture of the rig you have for sale? I'm looking for a good used rig, and live in Michigan, not too terribly far from you.
 

Our Sponsors

Top