Hey,
I am trying to figure out everything else I need while waiting for my equipment to come on so I can build my set up. My goal for the next day is to compile what I will need for nozzle tips. I did the search thing but there are so many differnet point of views it is tough to decide exactly what I need. Here is what I think I need based on the research. Please critique.
One set of nozzles will come with my machine for the 3500 psi, 5.6 gpm and one soap nozzle on the dual lance wand.
I figure I should get the following.
One more set of the 0, 15, 25, 40 degree tips to back up the factory ones,
One turbo nozzle rated for 6 gpm at 3500 psi, I believe this would be a 6
One set of nozzles for 1500 psi for wood surfaces which I believe should be a #9
One 40 degree tip size 12 for large surface rinsing to provide a 800 or so psi.
And a back up soap nozzle.
Please hold nothing back and let me know if I am missing a point here or missing any key nozzles.
Thanks, Mike
I am trying to figure out everything else I need while waiting for my equipment to come on so I can build my set up. My goal for the next day is to compile what I will need for nozzle tips. I did the search thing but there are so many differnet point of views it is tough to decide exactly what I need. Here is what I think I need based on the research. Please critique.
One set of nozzles will come with my machine for the 3500 psi, 5.6 gpm and one soap nozzle on the dual lance wand.
I figure I should get the following.
One more set of the 0, 15, 25, 40 degree tips to back up the factory ones,
One turbo nozzle rated for 6 gpm at 3500 psi, I believe this would be a 6
One set of nozzles for 1500 psi for wood surfaces which I believe should be a #9
One 40 degree tip size 12 for large surface rinsing to provide a 800 or so psi.
And a back up soap nozzle.
Please hold nothing back and let me know if I am missing a point here or missing any key nozzles.
Thanks, Mike
