Testing the waters with this.....

AdkinsPwrWash

New Member
Alright guys, up for grabs, I have my literally BRAND SPANKING NEW Alkota 5355J Pressure Washer. It has 5.5 hours on it, and is equipped with a 20-horse electric start Honda Engine, General Pump (4.6GPM@3,500psi) Diesel Burner which heats the water to 210 degrees. The machine is mounted on a 77"x12' Top Hat Single Axle trailer that had a ramp gate on the back, but the gate was cut down even with the top of the trailer, to make a small tail-gate which is covered in expanded metal...looks VERY clean. Trailer has treated floors, and is black with white 10-hole wheels on it. Mounted on the front of the trailer is a black diamond tread toolbox with gas-assisted struts which open the lid, and at the back, is two Alkota Pivoting hose reels with 100' Commercial Grade supply hose (5/8") and 150' of High pressure hose. (4000psi rated). Basically-All I have done wtih the machine was one job, it's only had one tank of gas ran through it, I filled it back up, and the gas has sat in the tank for one week tomorrow, and the trailer has only been towed from the dealership to my house, to where I had the machine mounted, back to my house, and then to the job...50 miles total? I sold my other machine, bought this one, and now due to circumstances which may end up being out of my control I may have to sale this unit, so I'm posting it here to see what kinda interest I get.


Moving on to the good stuff...asking price on this VERY nice set-up is $8,500.00..which is a little less than what the machine goes for new, and, this features everything listed above plus 2 xtreme wands..one being a traditional trigger style, the other bieng a dump gun...I have 2-zero degree nozzles, 2-15 degree's, 2-25's and 4-40 degree's and one 65 for applying soap. Also-I have a 14-gallon chemical tank, which has not even been mounted yet, it's just sitting on the front of the trailer, nothing has been run through the machine, but maybe a gallon of a mild degreaser.

Let me know if there is any interest, and I can get some better pics, and possibly arrange delivery within a reasonable distance for a little extra money.

Thanks Guys,

-Jason
 

AdkinsPwrWash

New Member
Couple of decent pics of it.

70323818.jpg


70323806.jpg


70323835.jpg


gasdiesel.jpg


Here's the specs from Alkota's website.

GPM 5.0 GPM
PRESSURE 3500 PSI
PUMP Triplex, Oil Bath, Ceramic Plungers
HP 20 HP
ENGINE Honda
START Electric
DRIVE Belt
COIL 126', 1/2" ID, Schedule 80
BURNER Pressure Atomizing, Automatic Ignition
FUEL Fuel Oil, #1 Diesel
BTU RATING 350,000
VOLTAGE 12V
FUEL CONSUMPTION 3.0 GPH
FUEL TANK 12 Gallons
GAS TANK 2.7 Gallons
TEMPERATURE RISE 110 Degrees
CHEMICAL Precise Metered
LENGTH 48.5"
WIDTH 40"
HEIGHT 45"
WEIGHT 870 lbs.
FLOAT TANK Stainless Steel
 
O

OrangeCrest

Guest
nice looking system, hope you are to get what you are asking for it and everything else works out for you as well...
 

AdkinsPwrWash

New Member
Thanks OrangeCrest. In All honesty, I am somewhat flexible on the price, reason for selling is I may be moving back to New Mexico, and need to pay off some debt.
 

Our Sponsors

Top