X-Jet Accessory

[wanderer]

Recently purchased an x-jet after all the commentary from you guys. Now my problem is my wand is too long. What size wand would you recommend? Any particular gun are will any of them do? Please help again. BigBill

------------------

 

[Mike Hughes]

When I use my x-jet, I mostly just connect it directly to my trigger gun, with no wand at all. Another solution for you would be to simply use a longer hose on the x-jet.......then it would have no trouble reaching the bucket. Call Ron at Xterior, maybe he could hook you up with a larger hose, or you might be able to find it locally somewhere.

------------------
Mike Hughes
Everclear
Souderton, PA

 

[Ron Strickland/Xtrerior S]

Good morning Big Bill,
Mike is right. Install a 1/4" male quick connect in the gun where the lance screws in and add a 1/4" female plug to the lance where it screws into the gun. This way you can also break the gun down for easy storage.
If you need extra hose, we have it or you can purchase it wherever they carry 3/8 ID reinforced vinyl hose. You can also add up to 100' of hose to the existing hose without a boost.
Ron/Xterior

------------------

 

[ALL-BRITE]

Ron why do I sometimes have a hard time getting the xjet to draw solution when the hose is extended up vertically. In order for it to work I have to lower the Extention wand down draw soap then raise it back up? Thanks Tim

------------------
Tim Highfield
ALL-BRITE POWERWASHING