derekcaldwell
New Member
I just got through cleaning someone's gutters and had some problems. I used Simple Green on the gutters and it worked great or so I thought. I even tested it out on a smaller area and it worked fine. On the bottle it says it can be used for aluminum and painted surfaces which is what gutters are. I then did the whole house with Simple Green and my pressure washer which I bascially just rinsed with. Didn't use the pressure cus I was about 1-2 ft away from gutters. I hope that was far enough. Anyways after finsishing I walked around and noticed that there were areas of shiny aluminum showing through. I freaked but realized I had to fix it by spot painting those areas. I took a gutter downspot section to the hardware store to match the paint. Then when I painted those few areas and let the paint dry a few hours later the results were disappointing. Now instead of clean gutters there is clean gutters with paint spots. What do I do for this situation and what do I do or not do to prevent this from happening again?
Any help is much appreciated.
Any help is much appreciated.